Elevator Belt Manufacturer

Belt Elevator-Hopper

 

Syntron® Model BEH Elevating Equipment

As an elevator belt manufacturer, we strive to provide the most reliable and durable products. In applications where the part’s shape or size hinders free-flow from conventional hoppers, the Syntron® Model BEH Belt Elevator Hopper feeds parts directly from the supply hopper onto a cleated belt, thus eliminating the need for an intermediate trough feeder between the hopper and belt elevator.

The belt elevator hopper design is advantageous in applications where product trends to bridge, preventing the parts from flowing readily from the throat of the supply hopper. The belt elevator hopper offers an adjustable feed rate through its variable speed control and, with the addition of an optional flow switch, can operate intermittently.

Range of Discharge Heights

Available in discharge heights ranging from 34 to 132 inches, the belt elevator hopper can be furnished with a 6 or 12 inch wide cleated rubber belt with 12 inch cleat spacing. For heights exceeding standard units, contact Homer City Automation. The discharge chute is available in standard widths of 6 or 12 inches, and is adjustable from a 35 to 55 degree slope. Hoppers for the belt elevator hopper are available in 5, 10, 15 or 20 cubic foot capacities.

The belt elevator hopper operates from 115 volt, 60 cycle, single phase power supply. This unit comes complete with a 90 volt DC motor and variable speed control, optional voltages available on request.

Available Options

  • Stainless steel part contact surfaces with FDA-approved white belt
  • Hopper with quick-dump door
  • Various linings for hopper and discharge chute

 

  • Casters with floor lock
  • 12-inch wide belt with 6-inch cleat spacing
  • Various belt cleat heights
  • 230/460 volt, 60 cycle, three phase operation

Specifications/Manuals


Belt Elevator Hopper Chart

Please wait...
Belt Elevator-Hopper

Syntron® Model BE Parts Elevator

Gentle Elevation of Parts

If packaging, assembly or processing lines need gentle elevation of parts, look to Syntron® Parts Elevators to do the job. These parts elevator units combine a hopper, vibratory trough feeder and inclined cleated belt to elevate parts to parts feeder or other processing points.

Controlled Feed Rates

The vibratory trough feeder assures controlled flow of parts from the hopper to the parts elevator. All hoppers are manufactured with an adjustable gate to control depth of parts in the trough. This assures that parts are properly located onto the belt cleats.

Intermittent Operation

Syntron® Parts Elevators can operate intermittently when signaled by a flow switch positioned beyond the discharge of the elevator. This flow switch signals the elevator to deliver parts when required.

Range of Discharge Heights

The Parts Elevator is available with the standard discharge heights ranging from 41-1/2 to 134-1/4 inches, with either a 6 or 12 inch wide rubber cleated belt. Both belts have standard cleat spacing of 12 inches. Optional 6 inch cleat spacing is also available. For heights other than those please contact Homer City Automation

The standard discharge chute has a 6 inch wide opening and is adjustable from a 15 to 45 degree slope. Optional equipment includes a part diverter chute which provides two lines of flow, controlled independently from a single elevator.

Hopper Ranges

These units can be supplied in 5, 10 or 15 cubic foot capacities. The hopper can be furnished with a vibrator to gently assist part flow from the hopper.

Available Options

  • Stainless steel part contact surfaces with FDA-approved white belt
  • Various linings for hopper, vibratory trough and discharge chute
  • Casters with floor lock
  • Flow switch
  • Six inch wide cleat spacing
  • Molded belt side walls

Specifications/Manuals


Model BE Parts Elevator Chart

Please wait...